| Exam Code | 300-410 |
| Exam Name | Implementing Cisco Enterprise Advanced Routing and Services |
| Vendor | Cisco |
| Total Questions | 615 |
| Last Updated | 26-Oct, 2026 |
- Latest & Verified Questions
- Detailed Explanations
- Regular Updates
- Full-Length Practice Tests
- Boost Your Exam Confidence
PDF Study Materials
Downloadable guides and resources
Practice Tests
Full-length tests with real exam experience
Progress Tracking
Monitor your performance and improvement
Study Anywhere
Access on desktop, tablet, and mobile
Free 300-410 Practice Questions
Explore 8 free practice questions for the Cisco 300-410 exam and review the answers and explanations to support your preparation.
-
Question 1
Single answerUsers in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
R1# show ipv6 eigrp topology
EIGRP-IPv6 Topology Table for AS(100)/ID(10.1.12.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 2001:DB8:0:4::/64, 1 successors, FD is 28416
via FE80::C828:DFF:FEF4:1C (28416/2816), FastEthernet3/0
P 2001:DB8:0:1::/6Normally I can help with things like this, but I don't seem to have access to that content. You can try again or ask me for something else.
-
Option A:Correct
Issue the eigrp stub command on R1
-
Option B:Correct
Issue the no neighbor stub command on R2.
-
Option C:Correct
Issue the eigrp command on R2.
-
Option D:Correct
Issue the no eigrp stub command on R1.A
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: D
-
-
Question 2
Single answerWhat is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
-
Option A:Correct
R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.
-
Option B:Correct
R1 does not accept any routes other than 192.168.130.0/24
-
Option C:Correct
R1 does not forward traffic that is destined for 192.168.30.0/24
-
Option D:Correct
Network 192.168.130.0/24 is not allowed in the R1 table
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: A
-
-
Question 3
Single answerWhich method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?
-
Option A:Correct
nonbroadcast multiaccess
-
Option B:Correct
packet switching
-
Option C:Correct
policy-based routing
-
Option D:Correct
forwarding information base
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: C
-
-
Question 4
Single answerRefer to the exhibit.
An engineer must establish a point-to-point GRE VPN between R1 and the remote site. Which configuration accomplishes the task for the remote site?-
Option A:Correct
Interface Tunnel1tunnel source 199.1.1.1tunnel destination 200.1.1.3ip address 192.168.1.3 255.255.255.0
-
Option B:Correct
Interface Tunnel1tunnel source 200.1.1.3tunnel destination 199.1.1.1ip address 192.168.1.1.255.255.255.0
-
Option C:Correct
Interface Tunnel1tunnel source 200.1.1.3tunnel destination 199.1.1.1ip address 192.168.1.3.255.255.255.0
-
Option D:Correct
Interface Tunnellunnel source 199.1.1.1tunnel destination 200.1.1.3ip address 192.168.1.1.255.255.255.0
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: C
-
-
Question 5
Single answerA newly installed spoke router is configured for DMVPN with the ip mtu 1400 command. Which configuration allows the spoke to use fragmentation with the maximum negotiated TCP MTU over GRE?
-
Option A:Correct
ip tcp adjust-mss 1360crypto ipsec fragmentation after-encryption
-
Option B:Correct
ip tcp adjust-mtu 1360crypto ipsec fragmentation after-encryption
-
Option C:Correct
ip tcp adjust-mss 1360crypto ipsec fragmentation mtu-discovery
-
Option D:Correct
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: A
Explanation
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn-troubleshoot-00.html
-
-
Question 6
Single answerRefer to the exhibit.
An engineer implemented CoPP but did not see OSPF traffic going through it. Which configuration resolves the issue?-
Option A:Correct
ip access-list extended OSPF permit ospf any any
-
Option B:Correct
policy-map COPP class OSFP police 8000 conform-action transmit exceed-action transmit violate-action drop
-
Option C:Correct
control-plane service-policy input COPP
-
Option D:Correct
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: B
-
-
Question 7
Multiple answersRefer to the exhibit.
A network administrator is troubleshooting OSPF adjacency issue by going through the console logs in the router, but due to an overwhelming log message stream it is impossible to capture the problem Which two commands reduce console log messages to relevant OSPF neighbor problem details so that the issue can be resolved? (Choose two)
-
Option A:Correct
debug condition interface
-
Option B:Correct
debug condition ip
-
Option C:Correct
debug condition ospf neighbor
-
Option D:Correct
debug condition session-id ADJCHG
-
Option E:Correct
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: A, D
-
-
Question 8
Single answerA network administrator is troubleshooting a failed AAA login issue on a Cisco Catalyst c3560 switch. When the network administrator tries to log in with SSH using TACACS+ username and password credentials, the switch is no longer authenticating and is failing back to the local account. Which action resolves this issue?
-
Option A:Correct
Configure ip tacacs source-interface GigabitEthernet 1/1
-
Option B:Correct
Configure ip tacacs source-ip 192.168.100.55
-
Option C:Correct
Configure ip tacacs-server source-ip 192.168.100.55
-
Option D:Correct
Show Answer & Explanation Hide Answer & Explanation
Correct Answer: A
-