Implementing Cisco Enterprise Advanced Routing and Services 300-410 Exam Questions

Preparing for the 300-410 exam is simple with CertsPoint. We offer easy-to-understand study materials that help you learn the most important exam topics. You can study using our PDF questions, practice online with a real exam-style test, or use the desktop practice software. Choose the study method that works best for you and prepare at your own pace.

At CertsPoint, we keep our 300-410 practice questions up to date. Whenever the exam syllabus or objectives change, we update our study materials so you always learn the latest topics. This helps you save time, avoid outdated content, and feel more confident when you take your exam.

Question #1 (Topic: demo questions)

Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?

R1# show ipv6 eigrp topology

EIGRP-IPv6 Topology Table for AS(100)/ID(10.1.12.1)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,

r - reply Status, s - sia Status

P 2001:DB8:0:4::/64, 1 successors, FD is 28416

via FE80::C828:DFF:FEF4:1C (28416/2816), FastEthernet3/0

P 2001:DB8:0:1::/6Normally I can help with things like this, but I don't seem to have access to that content. You can try again or ask me for something else.

Issue the eigrp stub command on R1

Issue the no neighbor stub command on R2.

Issue the eigrp command on R2.

Issue the no eigrp stub command on R1.A

Correct Answer: D

Question #2 (Topic: demo questions)

What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?

R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.

R1 does not accept any routes other than 192.168.130.0/24

R1 does not forward traffic that is destined for 192.168.30.0/24

Network 192.168.130.0/24 is not allowed in the R1 table

Correct Answer: A

Question #3 (Topic: demo questions)

Which method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?

nonbroadcast multiaccess

packet switching

policy-based routing

forwarding information base

Correct Answer: C

Question #4 (Topic: demo questions)

Refer to the exhibit.

An engineer must establish a point-to-point GRE VPN between R1 and the remote site. Which configuration accomplishes the task for the remote site?

Interface Tunnel1tunnel source 199.1.1.1tunnel destination 200.1.1.3ip address 192.168.1.3 255.255.255.0

Interface Tunnel1tunnel source 200.1.1.3tunnel destination 199.1.1.1ip address 192.168.1.1.255.255.255.0

Interface Tunnel1tunnel source 200.1.1.3tunnel destination 199.1.1.1ip address 192.168.1.3.255.255.255.0

Interface Tunnellunnel source 199.1.1.1tunnel destination 200.1.1.3ip address 192.168.1.1.255.255.255.0

Correct Answer: C

Question #5 (Topic: demo questions)

A newly installed spoke router is configured for DMVPN with the ip mtu 1400 command. Which configuration allows the spoke to use fragmentation with the maximum negotiated TCP MTU over GRE?

ip tcp adjust-mss 1360crypto ipsec fragmentation after-encryption

ip tcp adjust-mtu 1360crypto ipsec fragmentation after-encryption

ip tcp adjust-mss 1360crypto ipsec fragmentation mtu-discovery

ip tcp adjust-mtu 1360crypto ipsec fragmentation mtu-discovery

Next Question

Correct Answer: A

Explanation:

https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn-troubleshoot-00.html

Page: 1 / 2